MaximaVida metal table legs New York 40 cm square clear varnish

These clear varnished table legs of 40 cm have a 6 degree angle when they are placed under your tabletop. The table legs are not connected to each other by a metal plate which means you can placed them under your table top in three different ways; inwards, outwards or with a quarter turn. Besides that, you can decide for yourself where exactly you would like to place the table legs under the table top. Ideal for your DIY project! 

Why are we so happy with these table legs? 

- Robust industrial look 
- Ideal for your own DIY project
- Including felt for underneath the table legs
- Including 18 screws of 5 x 25 mm 

These square slanted leg is made of 5 cm x 5 cm steal. To create extra stability, we have given the table legs a 10 cm x 10 cm mounting plate with 4 screw holes. Our slanted black table legs are therefore also suitable for heavier table tops, cabinets etc. The set of legs comes with 18 special screws 5 x 25 mm for our 28 mm thick tabletops. With only a few screws, you can turn your current table or side table into a super trendy piece of furniture.

At the bottom of each table leg, we have welded a metal plate that is fitted with felt. This will make sure that your floor will not get damaged. 

Tip from us: Not sure of the industrial table legs will fit? Please measure  whether the 4 metal plates of 10 cm x 10 cm will fit under your table top BEFORE purchase. This to avoid sending packages back and forth unnecessarily and put an unnecessary burden on the environment.

We have placed very clear and detailed pictures of the table legs with the product and all dimensions are clearly mentioned. In case you would like to receive additional photos or information in this product before ordering, please let us know! In this way, we can work together and prevent unnecessary returns! 
 

Material 

This set of slanted table legs consists of 4 table legs of 40 cm that are coated with a clear varnish (hardwax) for indoor use. Because of the clear varnish that has been used, you can still see some irregularities on the beautiful raw steel, perhaps even a little spot of rust. This  gives the table legs an extra sturdy and industrial look! When you like it sleek and a little less sturdy, you might want to choose the black coated table legs instead. 

Because of their height, these legs are perfect to be used under cabinets, crates, planters or tree-trunks. Due to its height, they are also very suitable to be used for a bench. For higher tables, you can also use our 74 cm high black table legs.  

The holes of the mounting plates of 10 cm x 10 cm are suitable for 4 screws of 4,5 or 5. The length of the screws will depend on the thickness of the material that you will use. Of course it is wise to use screws that are as long as possible.
 
We recommend that you to pre-drill the screw holes. 

Delivery

These table legs will be delivered in a box of 44 x 28 x 13 cm and weighs 5 kg. 
This product will be delivered with DPD. DPD will come to your door once. Are you not at home and is it not possible to deliver your parcel at your neighbours? Depending on the size and weight of your parcel, it will either be offered to you again or it will go to a parcel shop.
 
Would you like to leave a comment to the driver (for example that you doorbell does not work or that it can be delivered to the neighbours)? Then please leave a note at your front door. Unfortunately it is not possible for us to hand the driver extra information before delivery. If you would like to know more about DPD, please don’t hesitate to contact us. 

Assembly

After receipt, you can attach the table legs immediately under the desired table top. The holes in the 10 x 10 cm mounting plate are suitable for four 4.5 or 5 screws. The length depends on the thickness of the material that you are using. It is wise to use screws that are as long as possible.

We advise you to measure and pre-drill the screw holes before you finally attach the table legs.